HDFury’s 4K UHD splitter comes as a tiny 2 ways (1 input, 2 outputs) splitter device that support up to 4K (UHD, 2160p) digital signal. It features some fresh new development such as EZ/Expert mode, EDID AutoMix and EDID Manual utility, and as always… furious features can be unlocked via USB upgrade.
Splitter 4K UHD Key Features:
Our Splitter 4K UHD handles all video formats down to SD (480p) and all the way up to UHD (2160p).- AutoMix EDID feature will create a custom EDID by mixing both sink EDID connected to the splitter output ports.
- Custom and manual EDID utility available from the download section.
- Featuring a smart reset switch so you will never have to unplug and replug HDMI cable again, just press the reset button and HPD events are reinitialized.
- Just like any recent HDfury hardware, it comes with USB upgradable firmware that allow you to unleash furious features.
4K Splitter technical specs
DVI Specification 1.0 Compliant- HDMI Specification 1.4a Compliant
- Integrated HDCP decryption/encryption engines which are compliant with HDCP Rev 1.3 specification
- Integrated automatic EDID processing
- Wide Frequency Range: 25MHz – 340MHz (beyond 4K spec)
- Supports 12-bit Deep Full HD, Full 3D and 4K2K video.
- Supports Standard Audio, DSD Audio and HD (HBR) Audio
- Supports 1 DVI/HDMI input port and 2 DVI/HDMI output ports
- Supports conversion of HDMI signaling to DVI signaling
- Supports HDCP Repeater
- Scalable to make more than 4 output ports
- Supports 2D and 3D video signals in NTSC 480i/p, PAL 576i/p, HDTV 720p/1080i/1080p/1440p/2160p
- Size : 65 * 49 * 39 (mm)
Source: HDFury.com
Got one of their splitter to defeat hdcp in my streaming setup, it works like a charm ! actually it’s the only splitter on the market that have a dedicated mode where it won’t flash all screen when you connect/disconnect a display on the fly to it.